Design Loads On Structures During Construction

Author: American Society of Civil Engineers
Editor: ASCE Publications
ISBN: 9780784470886
Size: 16,45 MB
Format: PDF
Read: 604
Download

This StandardØ provides minimum design load requirements during construction for buildings and other structures. It addresses partially completed structures and temporary structures used during construction. The loads specified are suitable for use either with strength design (such as USD and LRFD) or with allowable stress design (ASD) criteria. The loads are equally applicable to all conventional construction methods. Topics include loads and load combinations, dead and live loads, construction loads, lateral earth pressures, environmental loads, and performance and safety criteria. The basis of loads are probabilistic analysis, observation of construction practices, and expert opinions. Maximum, as well as arbitrary point-in-time values of loads are given.

Design Loads On Structures During Construction

Author:
Editor:
ISBN: 9780784413098
Size: 20,32 MB
Format: PDF, Docs
Read: 960
Download

Prepared by the Design Loads on Structures during Construction Standards Committee of the Codes and Standards Activities Division of the Structural Engineering Institute of ASCE Design loads during construction must account for the often short duration of loading and for the variability of temporary loads. Many elements of the completed structure that provide strength, stiffness, stability, or continuity may not be present during construction. Design Loads on Structures during Construction, ASCE/SEI 37-14, describes the minimum design requirements for construction loads, load combinations, and load factors affecting buildings and other structures that are under construction. It addresses partially completed structures as well as temporary support and access structures used during construction. The loads specified are suitable for use either with strength design criteria, such as ultimate strength design (USD) and load and resistance factor design (LRFD), or with allowable stress design (ASD) criteria. The loads are applicable to all conventional construction methods. Topics include: load factors and load combinations; dead and live loads; construction loads; lateral earth pressure; and environmental loads. Of particular note, the environmental load provisions have been aligned with those of Minimum Design Loads for Buildings and Other Structures, ASCE/SEI 7-10. Because ASCE/SEI 7-10 does not address loads during construction, the environmental loads in this standard were adjusted for the duration of the construction period. This new edition of Standard 37 prescribes loads based on probabilistic analysis, observation of construction practices, and expert opinions. Embracing comments, recommendations, and experiences that have evolved since the original 2002 edition, this standard serves structural engineers, construction engineers, design professionals, code officials, and building owners.

Construction Management And Design Of Industrial Concrete And Steel Structures

Author: Mohamed A. El-Reedy
Editor: CRC Press
ISBN: 9781439816004
Size: 12,98 MB
Format: PDF
Read: 960
Download

The recent worldwide boom in industrial construction and the corresponding billions of dollars spent every year in industrial, oil, gas, and petrochemical and power generation project, has created fierce competition for these projects. Strong management and technical competence will bring your projects in on time and on budget. An in-depth exploration of both these aspects and the resulting challenges, Construction Management and Design of Industrial Concrete and Steel Structures provides a practical guide to the design of reinforced concrete and steel structures and foundations in industrial projects. Renowned expert Mohamed A. El-Reedy covers the entire industrial construction process, from project management to design and construction to sigh off and providing a maintenance plan. Highlighting the differences between industrial construction and real estate or residential construction, he examines every phase and every role, from managerial to technical. He includes cases from industrial projects and covers the international technical practices, codes, and standards used in steel or concrete onshore or offshore projects. The book provides up-to-date methodologies in structure analysis, geotechnical studies, and international special codes and standards for industrial structures such as tanks, foundation under towers, machines, and special structures in industrial projects. It also examines the safety and economic benefits of developing a structure integrity management system. When a project has a budget that seems as huge at the structure itself, the client, engineering firm, and contractor must work together to achieve success. Discussing the interface between these three main partners, this book outlines strategies for checking the design and controlling a project in all its phases.

Onshore Structural Design Calculations

Author: Mohamed El-Reedy
Editor: Butterworth-Heinemann
ISBN: 0081019459
Size: 16,13 MB
Format: PDF, Kindle
Read: 501
Download

Onshore Structural Design Calculations: Energy Processing Facilities provides structural engineers and designers with the necessary calculations and advanced computer software program instruction for creating effective design solutions using structural steel and concrete, also helping users comply with the myriad of international codes and standards for designing structures that is required to house or transport the material being processed. In addition, the book includes the design, construction, and installation of structural systems, such as distillation towers, heaters, compressors, pumps, fans, and building structures, as well as pipe racks and mechanical and electrical equipment platform structures. Each calculation is discussed in a concise, easy-to-understand manner that provides an authoritative guide for selecting the right formula and solving even the most difficult design calculation. Provides information on the analysis and design of steel, concrete, wood, and masonry building structures and components Presents the necessary international codes and calculations for the construction and the installation of systems Covers steel and concrete structures design in industrial projects, such as oil and gas plants, refinery, petrochemical, and power generation projects, in addition to general industrial projects

Forensic Engineering

Author: Paul A. Bosela
Editor:
ISBN: 9780784406922
Size: 17,85 MB
Format: PDF
Read: 339
Download

"The Proceedings of the Third Forensic Congress contains 55 papers on Forensic Engineering. Each paper applies engineering principles for investigating failures and performance problems of engineered facilities, and development of practices and procedures "

Safety Reliability And Risk Analysis

Author: Sebastián Martorell
Editor: CRC Press
ISBN: 1482266482
Size: 13,34 MB
Format: PDF, Kindle
Read: 392
Download

Safety, Reliability and Risk Analysis. Theory, Methods and Applications contains the papers presented at the joint ESREL (European Safety and Reliability) and SRA-Europe (Society for Risk Analysis Europe) Conference (Valencia, Spain, 22-25 September 2008). The book covers a wide range of topics, including: Accident and Incident Investigation; Crisis and Emergency Management; Decision Support Systems and Software Tools for Safety and Reliability; Dynamic Reliability; Fault Identification and Diagnostics; Human Factors; Integrated Risk Management and Risk-Informed Decision-making; Legislative dimensions of risk management; Maintenance Modelling and Optimisation; Monte Carlo Methods in System Safety and Reliability; Occupational Safety; Organizational Learning; Reliability and Safety Data; Collection and Analysis; Risk and Evidence Based Policy Making; Risk and Hazard Analysis; Risk Control in Complex Environments; Risk Perception and Communication; Safety Culture; Safety Management Systems; Software Reliability; Stakeholder and public involvement in risk governance; Structural Reliability and Design Codes; System Reliability Analysis; Uncertainty and Sensitivity Analysis. Safety, Reliability and Risk Analysis. Theory, Methods and Applications will be of interest for academics and professionals working in a wide range of industrial and governmental sectors, including Aeronautics and Aerospace, Civil Engineering, Electrical and Electronic Engineering, Information Technology and Telecommunications, Insurance and Finance, Manufacturing, Mechanical Engineering, Nuclear Engineering, Policy Making and Public Planning.

North American Tunneling 2018 Proceedings

Author: Alan Howard
Editor: Society for Mining, Metallurgy & Exploration
ISBN: 0873354664
Size: 19,61 MB
Format: PDF, ePub, Mobi
Read: 836
Download

Your timely source for more cost-effective and less disruptive solutions to your underground infrastructure needs. The North American Tunneling Conference is the premier biennial tunneling event for North America, bringing together the brightest, most resourceful, and innovative minds in the tunneling industry. It underscores the important role that the industry plays in the development of underground spaces, transportation and conveyance systems, and other forms of sustainable underground infrastructure. With every conference, the number of attendees and breadth of topics grow. The authors—experts and leaders in the industry—share the latest case histories, expertise, lessons learned, and real-world applications from around the globe. Crafted from a collection of 126 papers presented at the conference, this book takes you deep inside the projects. It includes challenging design issues, fresh approaches on performance, future projects, and industry trends as well as ground movement and support, structure analysis, risk and cost management, rock tunnels, caverns and shafts, TBM technology, and water and wastewater conveyance.

Structural Engineering International

Author:
Editor:
ISBN:
Size: 14,19 MB
Format: PDF
Read: 679
Download


Temporary Structures In Construction Third Edition

Author: Robert Ratay
Editor: McGraw Hill Professional
ISBN: 0071753087
Size: 10,71 MB
Format: PDF, Docs
Read: 230
Download

The most complete and current guide to temporary structures in design and construction With significant revisions, updates, and new chapters, Temporary Structures in Construction, Third Edition presents authoritative information on professional practice, codes, standards, design, erection, maintenance, and failures of temporary support and access structures used in construction. New developments and advancingtechnologies are discussed throughout the book, and new chapters on construction and environmental loads, cranes, and lessons learned from temporary structure failures have been added. Improve the quality, safety, speed, and financial success of construction projects with help from this practical resource. Inside, 26 expert contributors cover: Professional and business practices Standards, codes, and regulations Construction and environmental loads Construction site safety Legal aspects Cofferdams Earth-retaining structures Diaphragm/slurry walls Construction dewatering Underground/tunneling supports Underpinning Roadway decking Construction ramps, runways, and platforms Scaffolding Shoring/falsework Concrete formwork Bracing and guying for stability Bridge falsework Temporary structures in repair and restoration Cranes Protection of site, adjacent areas, and utilities Failure of temporary structures in construction

Formwork For Concrete

Author: Mary Krumboltz Hurd
Editor: American Concrete Institute
ISBN: 0870311778
Size: 15,63 MB
Format: PDF, ePub, Mobi
Read: 360
Download